It is just one of the Modul+ features ...

Make the device you need by yourself, just pluging together various blocks without the need for screws or additional wiring. As easy as a game!

Modul+ Motor Devices

Order receivers, switching parts and transmission gears at once and the same time, they are the core devices. Make your choice: 1-pole or 2-pole, 16A, 25A or 32A. T55 standard impulse relays, or T70 impulse relays with central control. C50 contactors of C56 contactors with front handle, C57 day/night contactors or C52 override contactors, R54 relays or R58 changeover relays...


Modul+ Control Blocks

They will give you additional possibilities to control an impulse relay. You will then be able to control it by a time-switch or to control several relays by a single switch. With the ACT2 block, you may even control an impulse relay with two different voltages.

Modul+ Main Contact Blocks

In only one movement, you add two main contacts to a motor device and obtain a 3-pole or 4-pole 16A, 25A or 32A device. A 4-pole 32A contactor will be 2 DIN-module wide only ...

Modul+ Auxiliary Contact Blocks

Whenever you need additional contacts, for example for a remote signal or to synchronise the functioning of another device, a CX auxiliary block is the solution. It may be clipped on any motor device or main contact block of impulse relays, contactors or installation relays. You may even clip two clocks on the same device, if necessary!

Back | Next